Pitney Bowes Relay 5000 Operator's Manual page 160

8 • Scanning
Setting Up an
OMR Scan
Configuration
(continued)
8-14
Menu Option Associated Options/Actions
Count Direction Allows you to specify the count direction.
(Multi-bit only)
•
•
•
When Up is selected, the relevant code's binary value will
increase as the system scans each page.
When Down is selected, the relevant code's binary value will
decrease as the system scans each page.
Is Controlling Determines if the selected function controls where collations
end, or indicates error checking.
Toggles:
•
•
NOTES:
•
•
•
•
Wrap At Displays "Wrap At" numeric entry screen, where you enter
(Multi-bit only) the maximum code value in decimal format.
•
•
This field can contain up to seven digits.
Includes Zero Allows you to specify whether the sequence should include
(Multi-bit only) zero. Toggles:
•
•
When Yes is selected for the Include Zero option, the
relevant code's binary value would allow zero, which is
represented by no marks being printed within that section of
the code.
When No is selected for the Include Zero, the relevant code
will NOT include zero as a value. Therefore, a mark will
ALWAYS be printed within that section of the code for OMR.
Up (default),
Down, or
Random (MC only).
Yes (default)
No
Only one function can be controlling. Selecting Yes will
set all other functions to No.
This option displays for BOC only when an HCSF is
present.
When MC is controlling, the PC Control option is set to
No and becomes inactive.
If the Scan Configuration will be used with a closed-loop
file based processing job, then MC must be controlling.
This tells the inserter that file based processing will
provide the control instructions to the inserter based on
the MC read on each document and defines this as a
closed-loop scan code definition.
If the count direction is Up, the next code after this value
will be 0 or 1, depending on the Includes Zero setting.
If the count direction is Down, the code should jump to
this value after 0 or 1.
Yes (default), or
No.
SV63136 Rev. A