Pitney Bowes Relay 5000 Operator's Manual page 64

3 • Basic Operation
Adjusting
the Envelope
Openers
(continued)
3-20
Perform Width Adjustments (Outer Envelope Openers)
1. Loosen the thumbscrews on the top of the outer envelope openers.
Figure 3.9.2: Outer Envelope Opener Locations
2. Slide the openers as required to align the pointers with the outer edges
of the envelope.
• Push down on the thumbscrews to ensure the outer envelope
openers align with the envelope.
• If using small envelopes (less than 7.5 inches / 194mm wide), move
the outer envelope openers out and away from the outer edges of
the envelope.
• If using windowed envelopes, ensure the outer envelope openers do
not touch the edges of the window.
Align pointer with outer
edge of envelope
Figure 3.9.3: Aligning the Outer Envelope Opener
3. Tighten the thumbscrew on the top of the outer envelope openers.
Outer Envelope
Opener
Thumbscrews
SV63136 Rev. A