Table of Contents
Advertisement
8 • Scanning
Scanning
Features
(continued)
8-10
Divert Sheet Functionality
Divert sheet functionality allows you to create scanning jobs that will send
sheets to the lower divert area if sets exceed a given sheet count or contain
a specific scan mark.
This feature is implemented in one of two ways
•
Using the Divert Sheets (DVS) scan mark. The Divert Sheet scan mark
is available on systems that have BCR scanning or the Selective Op-
erations level of OMR scanning enabled. Refer to BCR and OMR Mark
Levels in this chapter for more information about the various levels of
scanning.
•
Setting the "Item Overcount Action" to "Divert". Refer to Creating a Job
in Chapter 3 or Assigning a Scan Configuration to an Existing Job in this
chapter for more information.
Jobs using the divert sheet functionality will send diverted sets to the lower
divert area. The remaining parts of the mail piece will be processed, inserted
into an outer envelope, and sent to the upper divert area.
NOTE: If the mail piece contains only a single set, which has been diverted, an
empty envelope will be sent to the upper divert area.
Currently, the system can divert up to 25 sheets. If a set contains more
than 25 sheets, the system will stop and you will need to manually remove
sheets from the Pre-fold Accumulator and the remainder of the set from the
appropriate sheet tray.
Divert sheet functionality cannot function with dynamic envelope selection at
this time.
Lower
Divert Area
Upper
Divert Area
SV63136 Rev. A
Advertisement
Table of Contents
Troubleshooting
