Pitney Bowes Relay 5000 Operator's Manual page 163

Setting Up
a BCR Scan
Configuration
(continued)
SV63136 Rev. A
Menu Option Associated Options/Actions
Count Direction Allows you to specify the count direction.
•
•
•
When Up is selected, the relevant code's binary value will
increase as the system scans each page.
When Down is selected, the relevant code's binary value will
decrease as the system scans each page.
Is Controlling Determines if the selected function controls where collations
end, or indicates error checking.
Toggles:
•
•
NOTES:
•
•
Code Base Allows you to specify the numeric value for the code base.
The minimum value is 2, and the maximum value is 43. The
default value is 32.
For codes that span more than one character, this sets the
value where each character resets to zero and carries to the
next character.
Code Type Select the appropriate code type:
•
•
•
These coding type options are intended to be consecutive
numbers that either count up or count down. They allow the
system to count up to a maximum, or down to either one or
zero and wraps at/to a defined maximum value.
BIN is a straight binary string. It is loaded into the barcode
construct at the starting bit position until all bits have been
assigned.
CCD is a character-based field aligned with character
boundaries for human readability. This number must be less
than 43. Recommended options for Code 3 of 9 barcodes
are: 10, 32, or 36. Base number must be 10 for Interleaved 2
of 5 barcodes.
XCD provides minimum code size at the expense of human
readability. It allows multi-bit fields to span partial characters.
Up (default),
Down, or
Random (MC only).
Yes (default for EOC)
No
Only one function can be controlling. Selecting "Yes" will
set all other functions to "No".
If the Scan Configuration will be used with a closed-loop
file based processing job, then MC must be controlling.
This tells the inserter that file based processing will
provide the control instructions to the inserter based on
the MC read on each document and defines this as a
closed-loop Scan Code definition.
BIN (for most single-bit functions)
CCD (for most multi-bit functions)
XCD (for minimum code size, this selection allows
multibit fields to span partial characters)
Scanning • 8
8-17