Pitney Bowes Relay 5000 Operator's Manual page 80

3 • Basic Operation
Sheet Options
(continued)
3-36
Menu Item Associated Options and Actions
Additional Settings Scan Settings
(continued)
NOTE: The "Content in Line with Marks", "Marks On", "Marks on
First Page Only", and "Mark Location Settings" options are not
available when the job requires a Custom Feeder.
•
•
•
•
•
•
•
Select Feed (SF) Settings allows assignment of a Feeder to one of
the 9 Select Feed scan marks.
NOTE: This menu option is not available when the item requires an
Attached Printer or Custom Feeder (when a High Capacity Sheet
Feeder is part of the configuration).
Scan Configuration allows a choice of saved scan
configurations to interpret scan marks.
Content in Line with Marks indicates that content is in line with
the scan marks in the feed direction.
Marks On indicates if marks are on the front or back of the
page.
Marks on First Page Only indicates marks are on only the first
of multiple sheets.
Mark Location Settings allows setup of various mark-related
measurements.
- Top of Page to First Mark is the distance from the top of
the page to the first mark.
- Total Length of Marks is the length from the top of the first
possible mark to the bottom of the last mark.
- Top of Page to Clear Zone is distance from the top of the
page to the beginning of the Clear Zone.
Length of Clear Zone iis the total length of the scan marks
-
plus the Clear Zones before and after the scan marks.
Refer to OMR Specifications in Chapter 8 for more information
on the Clear Zone and mark location settings.
Item Over Count Quantity is the number of sheets to be
accumulated before the system takes an alternate action.
Item Over Count Action indicates what will happen to items that
exceed the item over count quantity. Choices include:
- Divert – Select this option if the Scan Configuration does
not have the Divert Sheet (DVS) scan mark, and you
want the system to divert items once the item over count
quantity has been exceeded.
- Stop - Select this option if you want the system to stop
processing items once the item over count quantity has
been exceeded.
- Use Alternate Envelope – Select this option if the Scan
Configuration does not have the Envelope Select (ES)
scan mark, and you want the system to use an alternate
envelope for items that exceed the item overcount quantity.
Refer to Scanning Features in Chapter 8 for more information
on dynamic envelope selection and divert sheet functionality.
SV63136 Rev. A