Table of Contents
Advertisement
Site Name/Memory Card
Site Name/Memory Card
Where you can
save data
Data card size
Filename
Data card screen Before monitoring begins, the Site Name/Memory Card screen is displayed. The screen
Data card status
messages
5-20
Shop for Power Metering products online at:
The Energy Platform uses the Compact Flash data card as primary storage for data. It
automatically saves data in the card when monitoring is on. The Compact Flash card
must be loaded in the data card slot in order to record data.
The Energy Platform supports Compact Flash data card with part number CFDATA-
DB which at minimum has a usable memory space of 4GB. Note that the actual card
size is displayed in the unit's memory card format screen.
NOTE: Dranetz Compact Flash data cards have been tested to work properly with
the Energy Platform. Non-Dranetz Compact Flash cards may not be compatible
with the instrument and cannot be supported by Dranetz Customer Service in case
problems arise. Users are advised to use only Dranetz parts and accessories. See
Appendix A Optional Accessories for Compact Flash cards supplied by Dranetz.
The following files are created on the data card: filename.set for setups template and
filename.ddb for saved events. The maximum allowable length for a site/file name is 32
characters.
reports the current operational status of the data card.
The following messages may appear in the data card status line.
Status Message
Not Inserted
Data card not inserted or not detected. Insert a valid data card to
proceed.
Empty
Data card is empty.
Contains File
Data card presently contains files.
PowerMeterStore
www.
EP113
Description
Continued on next page
1.800.561.8187
.ca
Advertisement
Table of Contents
