Section F -Load Data File From Memory - Dranetz hdpq xplorer User Manual

Overview
Overview
Introduction
Loading data
from memory
4-56
Shop for Power Metering products online at:
Section F
Load Data File from Memory
Load Data File from Memory brings up a list of recorded monitoring sessions
containing events that are saved to memory while monitoring is on. You have the
ability to open a session file and view the event records contained therein, delete
session files, or copy and save the files from internal memory to an external memory
device.
Event data files (.ddb) are saved to the internal memory or to an external memory
device while monitoring is on. Once you load data files from memory, it will be stored
directly into the instrument's event and trend memory, to be acted on by the view data
screens.
Follow these steps to load data from memory.
Action...
STEP 1: From the Start Menu,
press Load data file from
memory. HDPQ Xplorer lists the
recorded monitoring sessions,
when data has been captured and
stored in memory. Each recorded
session is identified by a Session
#, Name, the Date and Time range
when monitoring started and
ended, and the Number of Event
Records contained in the
particular session. The monitoring
sessions are arranged in the order
of date/time they were recorded.
Use the scroll bar to go through
the session list and scroll the page
up or down.
Select (highlight) the desired
session data file.
• Press Open to bring up the
Event Data & Reports menu.
Proceed to Step 2.
• Press Close to remove data file
from the instrument's event and
trend memory.
PowerMeterStore
www.
Result...
NOTE:
The following icons indicate the status of action
you take with a particular session data file:
-means data file is open for active viewing
-means data file is open for active monitoring
-means data file is being archived or copied
to a USB flash drive
-means data file is being deleted from
memory
HDPQ-435
Continued on next page
1.877.766.5412
.com