Installation
procedure
(continued)
Shop for Power Metering products online at:
STEP 2: A HASP that can be keyed to the USB port (see figure below) is available. To
use the HASP, insert in the appropriate USB port in the computer, align the
HASP to the keyed port and push gently to lock it in place. Keep the HASP in
the port while using the DranView
The HASP is programmed to allow DranView
Dranetz product. The table below lists the HASP ID labels that go with
the corresponding Dranetz product.
NOTE: Make sure to write down the serial number of your HASP and keep
this information in a secure place. The serial number is required to replace
HASP in case it gets lost or destroyed.
HASP for USB Port
The table below shows the HASP ID labels that go with the corresponding Dranetz product.
Supports the following
Dranetz products
All Dranetz products including Energy
Platform, PX5, PowerVisa and PowerGuia with
MATH, PQDIF driver
Energy Platform; PX5; PowerVisa; PowerGuia
Energy Platform; PX5; PowerVisa; PowerGuia with
MATH, PQDIF driver
PowerMeterStore
www.
CH 9/ Downloading Events
application.
®
to work with a specific
®
ID Label
HASP for
USB Port
DVE-ALL
DVP-PX
DVE-PX
Continued on next page
.ca
9-5
1.800.561.8187