Site Name/Memory Card - Dranetz DBPVFLEX6K User Manual

Site Name/Memory Card

Site Name/Memory Card

PowerVisa uses the Compact Flash data card as primary storage for data. It
Where you can
save data
automatically saves data in the card when monitoring is on. The Compact Flash card
must be installed in either data card Slot 1 or Slot 2 in order to record data.
NOTE: Although the unit is able to detect availability of data card in either slot,
Dranetz strongly recommends the use of only one card slot (one data card) at a time.
PowerVisa requires a Compact Flash data card with minimum storage capacity of
Data card size
32MB, maximum of 128MB. See Appendix A Optional Accessories for the part numbers
of Compact Flash cards supplied by Dranetz.
NOTE: Dranetz Compact Flash data cards have been tested to work properly with
PowerVisa. Non-Dranetz Compact Flash cards may not be compatible with the
instrument and cannot be supported by Dranetz Customer Service in case
problems arise. Users are advised to use only Dranetz parts and accessories.
The following files are created on the data card: filename.set for setups template and
Filename
filename.ddb for saved events. The maximum allowable length for a site/file name is 32
characters.
Data card screen Before monitoring begins, the Site Name/Memory Card screen is displayed. The screen
reports the current operational status of the data card.
The following messages may appear in the data card status line.
Data card status
messages
Status Message
Not Inserted
Empty
Contains File
5-20
Data card not inserted or not detected. Insert a valid data card to
proceed.
Data card is empty.
Data card presently contains files.
VISA113
Description
Continued on next page