Section C -Monitor Same Circuit; Overview - Dranetz Energy Platform User Manual

Overview

Overview
Introduction
Monitoring
options
In this section
5-24
Shop for Power Metering products online at:
Section C
Monitor Same Circuit
Menu options for monitoring become available only after setting up the instrument or
from reading a setup template from the data card. Users can monitor the same circuit,
and configure combinations of setups unique to their task applications.
Users have the option to begin monitoring immediately or at a specified time and date.
The Monitoring Menu also allows users to do Advanced setups via the Modify Trigger
Parameters and Intervals option. Unlike the Automatic and Wizard setup procedures,
Advanced setup allows users to change parameters and enter new limits to capture
events. A full discussion on modifying threshold settings is found in Chapter 6
Advanced Setup Options.
The following topics are covered in this section.
Turning Monitoring On/Off
Monitoring at a Specified Time and Date
Modify Trigger Parameters and Intervals
PowerMeterStore
www.
Topic See Page
5-25
5-28
5-33
1.800.561.8187
.ca