Dranetz Energy Platform User Manual page 114

Monitoring at a Specified Time and Date, continued
Monitoring at
scheduled
intervals
5-32
Shop for Power Metering products online at:
You can specify the date and time when the unit will begin monitoring, and choose
from the following interval cycles when the unit will end recording and start a new file:
daily, weekly, bi-weekly, or a customized number of days. Data monitoring will end
when memory is full or when monitoring is stopped manually.
Action...
STEP 1: When monitoring using
Time Interval, the current date and
time (set to the next full hour) are
displayed on screen. Select the
interval schedule on how often you
want the unit to automatically end
and start a new data file.
• Start at: Indicates the date and
time when the unit will begin
monitoring.
• Interval: Indicates the time period
when the unit will automatically
collect and download event data.
• Daily: Monitors data in 24-hour
cycle and then starts a new file.
The unit will append the
filename for data collected
every 24 hours.
• Weekly: Monitors data in 7-day
cycle and then starts a new file.
The unit will append the
filename for data collected
every 7 days.
• Bi-Weekly: Monitors data in
14-day cycle and then starts a
new file. The unit will append
the filename for data collected
every 14 days.
• Custom: The user specifies the
time period (in days) when the
unit will end recording interval.
Press Change to set new time
interval.
• Press OK to accept the settings
and return to Home screen. The
message MONITORING
STATUS: ARMED appears on
screen.
Armed means that the system will
automatically begin monitoring at
the specified Start time and date.
• Press Cancel to retain previous
monitoring settings and return to
Home screen.
PowerMeterStore
www.
Result...
EP125b
EP125c
1.800.561.8187
.ca