Dranetz Energy Platform User Manual page 82

Reset to Factory Configuration, continued
Factory default
settings
4-16
Shop for Power Metering products online at:
Dranetz has set the default values for the various parameters of the Energy
Platform.
Current Probes: TR2500/TR2500A for A, B, C; TR2510/TR2510A for D
Scale Factors: 1:1 for V and I, channels A, B, C, D
Circuit Type: three phase wye
Mode of Operation: monitor
Nominal Value: measured V, I, frequency
Monitoring Mode: Long Term Timed Recording
Advanced Operations: individual limit setups
RMS Variation Limits: 10% Very Low, 90% Low, 110% High for voltage; none for
current
Journal Limit: journalling By Time for the various parameters
Triggers: all V triggers off
Journal Interval
Power Values:
Power Values Interval: 15 minutes
Waveform Snapshot: On
Demand and Energy:
Demand Sub-Interval: 5 minutes
Sub-Intervals per Interval: 3
Harmonics Journal Interval: 15 minutes
Site Name: Energy Platform Site
Size Increment by which Data is Saved in Card: 128 MB
Clock Type: Analog
Date: mm/dd/yy
Language: varies depending on unit model
NOTE: Units shipped within North America are factory set using the English/
European language group version.
Display
Backlight Timer: 1 minute
Contrast: 70%
Password Protect: OFF
PowerMeterStore
www.
1.800.561.8187
.ca