Monitoring Mode - Dranetz Energy Platform User Manual

Monitoring Mode

Monitoring Mode

Choose a
monitoring
mode
Monitoring
mode
descriptions
NOTE
5-18
Shop for Power Metering products online at:
The Energy Platform provides two monitoring modes of operation from which to
monitor and capture data relevant to user application.
Action...
STEP 1: From the Basic Meter
screen, press Next to display the
different Monitoring Mode
setups.
• Check to select your desired
monitoring mode setup. Press
Next and go to page 5-19.
• Press Cancel to quit and return
to Start menu.
Long-term Timed Recording, Demand, Energy sets the instrument to use periodic
measurements only. This setting is used for long-term statistical studies and
benchmarking field-based equipment testing and evaluation. No triggers are set so only
trended values are available.
Long-term Timed Recording, Demand, Energy with RMS Triggers is the same as
above except that snapshots and rms event triggers are active.
Users can override the default settings to customize the instrument to their application.
For the default settings of parameters in each monitoring mode, see Appendix B
Technical Specifications - Parameter Settings in Each Monitoring Mode.
PowerMeterStore
www.
Result...
EP111
1.800.561.8187
.ca