Table of Contents
Advertisement
Overview
Trend categories Energy Platform is able to display statistical trends or plots for the following parameter
In this section
Shop for Power Metering products online at:
Section B
categories:
Standard: Parameters include basic volts and amps, displacement power factor, residual
and net current, standard demand, energy, and harmonics. These power parameters are
measured more accurately using a one (1) second interval, summarized by min, max
and avg at the end of the interval.
Distortion RMS, THD, Frequency: Parameters include voltage and current THD,
voltage and current TID, crest factor, signed and unsigned harmonic, and transformer
factor.
Advanced Demand: Parameters include peak power and predicted demand. These
parameters measure the ratio of maximum demand of the power distribution system to
the total connected load of the system.
Advanced Energy: Parameters include energy on per phase and total basis as well as in
forward and reverse mode.
NOTE: See page 6-10 for the detailed list of parameters available for trending.
The following topics are covered in this section.
Trend Display
Trend Setup
PowerMeterStore
www.
Trend
Topic
CH 7/ View Event Data
See Page
7-6
7-7
7-5
1.800.561.8187
.ca
Advertisement
Table of Contents
