Table of Contents
Advertisement
Demand
parameter setup
(continued)
Shop for Power Metering products online at:
Action...
STEP 5: Use Demand Unit to set
the unit of measure for demand
energy.
• Press Demand Unit to display
the following selection values:
Watts Total, VA Total, VAR
Total.
• Press OK to accept changes in
parameter settings.
• Press Cancel to retain previous
setting and return to Demand
Parameters screen.
STEP 6: Use Billing Rate to
determine the rate and currency
that the instrument will use to
calculate utility costs.
• Press Billing Rate to calculate
the amount it costs to consume
electricity measured in kW-hr.
• Press the Currency button
repeatedly to display the
following selection values: US
dollar, Euro dollar.
• Press OK to accept changes in
billing rate settings.
• Press Cancel to retain previous
setting and return to Demand
Parameters screen.
PowerMeterStore
www.
CH 6/ Advanced Setup Options
Result...
EP112_206
EP112_209
6-7
1.800.561.8187
.ca
Advertisement
Table of Contents
