Dranetz Energy Platform User Manual page 157

Current probes
Voltage probes
Shop for Power Metering products online at:
Several Dranetz current probes can be used with Energy Platform: models
TR2500/A, TR2510, TR2520/A, TR2530/A, TR2540/A, TR2550/A, TR2019B,
TR2021, TR2022A, TR2023. The Energy Platform supports both DRANFLEX and
FLEXIBLE current probes. Typical current probes are illustrated in Chapter 2.
TR2500, TR2510, TR2520 (TR2500A, TR2510A, TR2520A): These models will
measure rms currents from 10 to 500 A, 0.1 to 500 A, 300 to 3000 A, respectively.
They plug directly into any of the current inputs on the rear panel. These probes are not
recommended for measuring medium or high frequency transients.
TR2021, TR2019B, TR2022, TR2023: These four probes are made for the Dranetz
model 658 but can be used with the Energy Platform by using an adapter cable
(part number CA4300). They can measure rms currents in ranges of 1 to 30 A, 1 to 300
A, 10 to 1000 A, and 10 to 3000 A, respectively, and are needed to accurately measure
medium and high frequency transients.
DRANFLEX Current Probes: DRANFLEX 3000XL/6000XL current probes allow
current measurements in the range of 0.5 to 3000 A full scale, or 0.5 to 6000 A full
scale. These probes are available in three sizes: 24" probe length - conductor(s) up to 8"
diameter; 36" probe length - conductor(s) up to 11" diameter; 48" probe length -
conductor(s) up to 17" diameter.
DRANFLEX 3 Phase Current Probes: DRANFLEX 3003XL/6003XL are 3 Phase
current probes that allow current measurements in 3 Phase circuits in the range of 0.5 to
3000 A full scale, or 0.5 to 6000 A full scale. These probes are available in three sizes:
24" probe length - conductor(s) up to 8" diameter; 36" probe length - conductor(s) up
to 11" diameter; 48" probe length - conductor(s) up to 17" diameter.
FLEXIBLE Current Probes: RR3035A and RR6035A flexible optional current probes
allow current measurements in the range of 3 to 3000 A full scale, or 6 to 6000 A full
scale. These probes are available in three sizes: 24" probe length - conductor(s) up to 8"
diameter; 36" probe length - conductor(s) up to 11" diameter; 48" probe length -
conductor(s) up to 17" diameter.
Fuse Voltage Adapter: Two accessory kits available: FVA-1 and FVA-4. FVA-1 is used
for a single voltage measurement input. It contains one fused voltage adapter and one
measurement connecting cable (Red) 50 cm in length. FVA-4 is used for a three phase
and neutral voltage measurement inputs. It contains four voltage adapters and four
measurement connecting cables 50 cm in length (one Red, one Yellow, one Blue, one
Grey).
Single Phase Measurement Cord: Allows measurement of a single phase circuit using a
standard AC outlet 115V for US and 250V for European, UK, and Australian countries.
PowerMeterStore
www.
APPENDIX A/ Optional Accessories
Continued on next page
1.800.561.8187
.ca
A-5