Dranetz Energy Platform User Manual page 74

Touch Screen Calibration, continued
Calibration
procedure
(continued)
4-8
Shop for Power Metering products online at:
Action...
STEP 3: Once touch screen
calibration is done, a message will
appear to indicate Touch screen
was successfully calibrated.
• Press OK to continue on with
calibration test verification.
Proceed to Step 4.
STEP 4: Test if touch screen
recognition operates properly by
applying pressure on the LCD
screen.
• Press Clear to reset LCD
screen and delete display
markings.
• Press Accept to complete the
touch screen calibration
procedure. Accepting will save
and store new touch screen
calibration data in memory.
Once the new data is stored, the
old touch screen calibration
data is lost. The screen will
return to the Display Setup
Menu.
• Press Cancel to discontinue the
touch screen calibration
procedure. Pressing Cancel will
retain the previous touch screen
calibration constants, no new
calibration data will be stored
in memory. The screen will
return to the Display Setup
menu.
PowerMeterStore
www.
Result...
MARK167
MARK168
1.800.561.8187
.ca