• Accept
• Cancel
5.6.3 SNMP Settings
SNMP is used in network management systems to monitor network-attached devices for conditions that warrant
administrative attention.
Click "Management SNMP Settings" to configure SNMP settings.
The page includes the following settings:
Object
• SNMP
• Contact
• Location
• Community Name (Read
Only)
Click Accept to apply the changes.
Click Cancel to cancel the settings.
Figure 5-50 SNMP Settings
Description
Enable or disable the SNMP service.
Enter the contact details of the device.
Enter the location of the device.
Enter the password for accessing the SNMP community for read-only
access.
-87-
User Manual of WAP-200N/WBS-200N