Wds Station (Wds Sta); Figure 5-5 Operation Mode - Wds Station - Planet WAP-200N User Manual

User Manual of WAP-200N/WBS-200N

5.1.4 WDS Station (WDS STA)

This section allows you to configure the WDS Station mode. In this mode, the device is acting as slave AP in the
WDS connection.
Go to the "System  Operation Mode" page to configure the device as "WDS Station" and then go to
"Wireless  Wireless Network" to configure the related wireless settings.
Figure 5-5 Operation Mode – WDS Station
For the configuration example, please refer to the section "Appendix C: FAQ, Q2".
-32-