Table of Contents
Advertisement
3.7.7 System Log
Click "System Log" to show the log information of device. The system log dialog allows
you to view the system log and click the "Refresh" button to fresh the system event logs.
System Log: You can Enable or Disable the System Log Function. Click "Apply
Changes" to apply your setting.
Note: Please Commit/Reboot if you want to make this settings effective immediately
3.7.8 SNMP
This page is used to configure the SNMP protocol. You can set SNMP related information
here.
Read Community: Select to set the password for incoming Get- and GetNext request from
management station.
Write Community: Select to set the password for incoming Set request from management
station.
60
Advertisement
Table of Contents
