Wireless Mac Filter; Figure 5-46 Wireless Mac Filter - Planet WAP-200N User Manual

5.5.4 Wireless MAC Filter

Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC
addresses. You can manually add a MAC address to restrict the permission to access the device or refer to
section 5.2.3 to kick the associated client from the wireless client list.
Click "Wireless  Wireless MAC Filter" to configure the wireless access control settings.
The page includes the following settings:
Object
• ACL Mode
• Add
• #
• MAC Address
• Delete
• Accept

Figure 5-46 Wireless MAC Filter

Description
Determines whether network access is granted or denied to clients whose
MAC addresses appear in the MAC Address table on this page. The
option includes Disable, Deny MAC in the list, or Allow MAC in the list.
Enter the wireless MAC address of the client in front of the Add button
and then click Add to add the new entry to the MAC filtering list.
Displays the sequence number of the entries.
Displays the MAC Address that will be denied/allowed to access this
device.
Click Delete to remove the entry from the list.
Click Accept to apply the setting.
-83-
User Manual of WAP-200N/WBS-200N