The page includes the following settings:
Object
• System Information
• LAN Settings
• WAN Settings
• Current Wireless Settings
5.2.2 Save/Reload
Click "Status Save/Reload" and the following page will be displayed.
Click Save & Apply to save and apply all configurations.
Click Revert to cancel the unsaved changes and revert to the previous settings that have been saved.
It's not necessary to save and apply the settings if unsaved changes list is empty.
Description
Shows the general system information such as device name, MAC
address, country, current time, and firmware version.
Shows Local Area Network settings such as the LAN IP address, subnet
mask, DHCP Server, and Rx/Tx packets.
Shows Wide Area Network settings such as the MAC address, connection
type, connection status, IP address, subnet mask, primary and secondary
DNS, and Rx/Tx packets.
Shows wireless information such as operation mode, wireless mode,
channel bandwidth, frequency, channel, information about each SSID,
security settings, and Rx/Tx packets.
Figure 5-12 Save/Reload
-51-
User Manual of WAP-200N/WBS-200N