Step 4. When the upgrade is finished, the system will auto reboot and you can click the hyperlink "Click here
when AP is ready" after the system restarts.
5.6.7 Time Settings
Click "Management Time Settings" to configure time zone and NTP server settings to be in sync with the
device's time.
The page includes the following settings:
Object
• Manually Set Date and Time
• Automatically Get Date and
Time
• Enable Daylight Saving
• Save/Apply
• Cancel
Figure 5-54 Time Settings
Description
Enter the date and time values in the date and time fields or click the
Synchronize with PC to get the date and time values from the
administrator's PC.
Select a time zone from the drop-down list and check whether you want to
enter the IP address of an NTP server or use the default NTP server.
Click to enable or disable daylight savings time. Select the start and stop
times from the Start Time and Stop Time dropdown lists.
Click Save/Apply to apply all changes.
Click Cancel to cancel the settings.
-91-
User Manual of WAP-200N/WBS-200N