Requirements; Preparation For Xrt Web Administration; Tcp/Ip Settings On Windows 95/98 - Planet XRT-401C Quick Installation Manual

* Cable modem or DSL/ADSL modem.
* Network cables.
Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
* PCs using Windows 95/98/ME, NT4.0, or 2000/XP.
In this section, we'll introduce steps of how to setup a PC to communicate with XRT
through TCP/IP protocol configuration.
Before starting web browser to connect to XRT, please check TCP/IP configurations on PC:
the PC must be configured either as a DHCP client and or fixed IP allocation on the intranet
or Internet. After ensuring TCP/IP configuration on the managing workstation, you may
connect to web administration page of XRT either from intranet, or Internet.
Following are guidelines of setting up TCP/IP configurations on different OS platform.

TCP/IP settings on Windows 95/98

If there is no TCP/IP installed on your Windows 95 or Windows 98, you must add the
protocol and change the settings on your PC.
Step 1 Open the Control Panel, and double-click the Network icon. The Network window
appears

Preparation for XRT web administration

Requirements

1