Snmp Settings - Planet WAP-500N User Manual

The page includes the following settings:
Object
• Management VLAN ID
• Accept
• Cancel

4.6.3 SNMP Settings

SNMP is used in network management systems to monitor network-attached devices for conditions that warrant
administrative attention.
Click "Management
Description
If your network includes VLANs and if tagged packets need to pass
through the Access Point, enter the VLAN ID. Otherwise, select No VLAN
tag.
Click Accept to apply the changes.
Click Cancel to cancel the settings.
SNMP Settings" to configure SNMP settings.
Figure 4-42 SNMP Settings
User Manual of WAP-500N/WBS-500N
-64-