Cli Settings; Log; Figure 5-57 Log - Planet WAP-200N User Manual

5.6.9 CLI Settings

The command line interface (CLI) allows user to access the device through a command console, modem or
Telnet connection for configuration.
Click "Management  CLI Settings" to enable/disable CLI (Command Line Interface).
The page includes the following settings:
Object
• CLI
• Save/Apply
• Cancel

5.6.10 Log

Click "Management  Log" to enable/disable system log.
Figure 5-56 CLI Settings
Description
Select ON/OFF to enable or disable the ability to modify the device via a
command line interface (CLI).
Click Save/Apply to apply all changes.
Click Cancel to cancel the settings.

Figure 5-57 Log

-93-
User Manual of WAP-200N/WBS-200N