The page includes the following specific settings in DHCP type:
Object
• Account Name (if required)
• Domain Name (if required)
• MTU
• Accept
• Cancel
5.4.2.2.
Static IP
If your ISP offers you static IP Internet connection type, select Static IP and then enter IP address, subnet mask,
primary DNS and secondary DNS information provided by ISP in the corresponding fields.
Figure 5-24 WAN Settings – DHCP
Description
Enter the account name provided by your ISP.
Enter the domain name provided by your ISP.
The maximum transmission unit (MTU) specifies the largest packet size
permitted for an internet transmission. The factory default MTU size for
DHCP is 1500. The MTU size can be set between 576 and 1500.
Click Accept to apply the setting.
Click Cancel to cancel the setting.
-61-
User Manual of WAP-200N/WBS-200N