5.5.5 Wireless Advanced Settings
Click "Wireless Wireless Advanced Settings" to configure the wireless advanced settings.
This section allows you to configure the wireless related settings to optimize the wireless network.
The page includes the following settings:
Object
• Data Rate
• Transmit Power
Figure 5-47 Wireless Advanced Settings
Description
Select a data rate from the drop-down list. The data rate affects
throughput. If you select a low data rate value, for example, the
throughput is reduced but the transmission distance increases. The
default is "Auto".
Configure the output transmission power of the device (Range:
11~29dBm). The PtP range less 1km should keep it as default and
distance exceed 5km is suggested to highest value.
The option is only allowed to be configured after disabled Green option of
"Operation Mode" page.
violating regional regulation unless your configuration meets the
-84-
User Manual of WAP-200N/WBS-200N
Keep it as default "Auto" setting to prevent