Planet WAP-200N User Manual page 63

The page includes the following specific settings in Static IP type:
Object
• Account Name (if required)
• Domain Name (if required)
• MTU
• IP Address
• IP Subnet Mask
• Gateway IP Address
• Accept
• Cancel
Figure 5-25 WAN Settings – Static IP
Description
Enter the account name provided by your ISP.
Enter the domain name provided by your ISP.
The maximum transmission unit (MTU) specifies the largest packet size
permitted for an internet transmission. The factory default MTU size for
static IP is 1500. The MTU size can be set between 576 and 1500.
Enter the device's WAN IP address provided by ISP.
Enter the device's WAN IP subnet mask provided by ISP.
Enter the device's WAN Gateway IP provided by ISP.
Click Accept to apply the setting.
Click Cancel to cancel the setting.
-62-
User Manual of WAP-200N/WBS-200N