System; Ip Settings - Planet WAP-200N User Manual

5.3 System

5.3.1 IP Settings

Click "System  IP Settings" to configure the LAN IP address.
The page includes the following settings:
Object
• IP Network Setting
• IP Address
• IP Subnet Mask
• Default Gateway
• Primary DNS
• Secondary DNS
• Use Link-Local Address
Figure 5-20 LAN IP Settings
Description
Select Obtain an IP address automatically (DHCP) to receive the IP
from DHCP server.
Select Specify an IP address to configure the AP to use static IP.
The LAN IP of the AP.
The default is 192.168.1.253. You can change it according to your needs.
The LAN subnet mask of the AP.
Enter the Gateway IP address of the AP.
Enter the primary DNS server of the AP.
Enter the secondary DNS server of the AP.
Click to enable a link-local address for the AP.
-56-
User Manual of WAP-200N/WBS-200N