The page includes the following settings:
Object
• DMZ Hosting
• DMZ Address
• Accept
• Cancel
5.5 Wireless
This section provides wireless related settings in different operation modes.
5.5.1 Wireless Network
Click "Wireless Wireless Network" to configure the wireless basic settings. The wireless settings on this
page may vary according to the selected operation mode.
Figure 5-31 DMZ
Description
Select Enable DMZ to activate DMZ functionality.
Enter an IP address of a device on the LAN.
Click Accept to apply the setting.
Click Cancel to cancel the setting.
-68-
User Manual of WAP-200N/WBS-200N