Snmp - Planet WDAP-C7210E User Manual

5.1.10

SNMP

This page provides SNMP setting of the router as shown in
Object
Enable SNMP
Read/Write Community
System Name
System Location
System Contact
Apply Settings
Cancel Changes
Figure 5-21: SNMP
Disable or enable the SNMP function.
The default configuration is enabled.
Allows entering characters for SNMP Read/Write Community of the
router.
Allows entering characters for system name of the router.
Allows entering characters for system location of the router.
Allows entering characters for system contact of the router.
Press this button to save and apply changes.
Press this button to undo any changes made locally and revert to
previously saved values.
-41-
User Manual of WDAP-C7210E
Figure 5-21.
Description