The security mode includes the following settings:
Object
• Security Mode
• Auth Type
• Input Type
• Key Length
• Default Key
• Key1 – Key4
• Save
• Cancel
Figure 5-39 Security Settings – WEP
Description
Select WEP from the drop-down list to configure the wireless network
using WEP encryption method.
Select Open System or Shared.
Select an input type of Hex or ASCII.
Level of WEP encryption is applied to all WEP keys.
Select a 64-/128-/152-bit password length.
40/64-bit: enter 10 hexadecimal digits (any combination of 0-9, a-f,
A-F and null key is not permitted) or 5 ASCII characters.
104/128-bit: enter 26 hexadecimal digits (any combination of 0-9,
a-f, A-F and null key is not permitted) or 13 ASCII characters.
128/152-bit: enter 32 hexadecimal digits (any combination of 0-9,
a-f, A-F and null key is not permitted) or 16 ASCII characters.
Select 1 – 4 to specify which of the four WEP keys the device uses as its
default.
Specify a password for the security key index. For security, each typed
character is masked by a dot.
Click Save to save the settings.
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
-75-
User Manual of WAP-200N/WBS-200N