Wds Link Settings; Figure 5-34 Wireless Network - Cb/Wds Sta/Cr/Repeater Mode - Planet WAP-200N User Manual

Figure 5-34 Wireless Network – CB/WDS STA/CR/Repeater Mode
The page includes the following settings:
Object
• Wireless Mode
• SSID
• Site Survey
• Prefer BSSID
• Wireless Security
• Accept
• Cancel

5.5.2 WDS Link Settings

Go to the "Operation Mode" page to configure the device as "WDS Bridge" and then go to "Wireless  WDS
Link Settings" to configure the WDS link settings including PtP (Point to Point) or PtMP (Point to Multiple Points)
applications.
Description
Wireless mode supports 802.11b/g/n mixed modes.
Specify the SSID if known. This field is completed automatically if you
select an Access Point in the Site Survey.
Scans nearby locations for Access Points. You can select a discovered
Access Point to establish a connection.
Enter the MAC address if known. If you select an Access Point in the Site
Survey, this field is completed automatically.
Refer to section 5.5.3 Security
Click Accept to apply the setting.
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
-71-
User Manual of WAP-200N/WBS-200N
Setting.