Download Print this page

Planet wnrt-625g Quick Installation Manual

802.11n 3g broadband router
Hide thumbs Also See for wnrt-625g:

Advertisement

Quick Links

802.11n 3G Broadband Router
WNRT-625G
Quick Installation Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the wnrt-625g and is the answer not in the manual?

Questions and answers

Summary of Contents for Planet wnrt-625g

  • Page 1 802.11n 3G Broadband Router WNRT-625G Quick Installation Guide...
  • Page 2: Table Of Contents

    Table of Contents Package Content ................3 Hardware Installation ..............4 Other outlook interface ..............6 Web Configuration ................8 Further Configuration ..............12...
  • Page 3: Package Content

    Package Content 1 x WNRT-625G 1 x Stand 1 x Ethernet Cable 1 x Power Adapter 1 x CD ROM 1 x Quick Installation Guide If any of the above items are missing or damaged, contact your local dealer for support.
  • Page 4: Hardware Installation

    Hardware Installation 1. Locate an optimum location for the WNRT-625G. 2. Adjust the antennas of WNRT-625G for the best coverage of your wireless network. 3. There are two way connecting to Internet, One is via 3G USB port, and another is from WAN port.
  • Page 5 / hub) to LAN port of WNRT-625G. 5. Connect the power adapter to the wall socket, and then connect it to the ‘12V DC’ socket of WNRT-625G. 6. Please check all LEDs on the front panel. ‘PWR’ LED should be steadily on.
  • Page 6: Other Outlook Interface

    Other outlook interface Enable/disable wireless signal button. Radio ON/OFF ** In case switching wireless signal via “Radio ON/ OFF” button to “OFF” status, the functions of wireless settings on web UI will be unavailable.
  • Page 7 This button has two functions: 1. To Clear All Data and restore the factory default values: Press the RST (reset) button for longer than 20 seconds until the LED of power flash, and then the router will reset itself to the factory default settings. RST / WPS (Warning: your original configurations will be Button...
  • Page 8: Web Configuration

    Please follow the steps below to configure WNRT- 625G basic settings. 1. Open your web browser and type WNRT-625G default IP address (http://192.168.0.1) into the “Address Field” of you web browser. Before configuration, please make sure your PC’s IP address is under the same IP range with WNRT-625G.
  • Page 9 3. Please click “Quick Setup” on the left panel to setup WNRT-625G. 4. Select a Time Zone that corresponds to your country. Click “Next” to continue.
  • Page 10 5. WNRT-625G supports 7 Internet connection types. Please click “3G/3.5G” to configure 3G mobile Internet. (Other methods please refer to the manual in CD-ROM. 6. Please input the Internet connection parameters if it is required by your 3G/3.5G Service Provider. Click “Next” to continue.
  • Page 11 7. Configure wireless relative value (included choosing or changing Band / Band / Channel Number) 8. Select encryption type to secure your wireless network. 9. Click “Apply” to save the settings. 10. Please wait for 30 seconds for WNRT-625G restart. Then click “OK”.
  • Page 12: Further Configuration

    Further Configuration If you want to configure WNRT-625G with more detail settings, please refer to the manual in the CD-ROM. If you have any difficulty on resolving the problem while installing or using WNRT-625G, please contact with local dealer or PLANET technical support.