Set Intelligent-Multicast Group-Filtering Delay Time; Set Security Mode; Set Arp-Aging-Interval - Avaya P334T-ML User Manual

Chapter 6 CLI – Layer 2
Example:
P330-N> set intelligent-multicast router-port-pruning time 20
Done!

set intelligent-multicast group-filtering delay time

Use the set intelligent-multicast group-filtering-delay time
command to define group filtering time delays.
The syntax for this command is:
set intelligent-multicast group-filtering-delay time <time>
time
Example:
P330-N> set intelligent-multicast group-filtering-delay time
20
Done!

set security mode

Use the set security mode command to enable or disable MAC security at the
stack level. When enabled, the ports are secured based on their individual
configuration. When disabled, all the ports in a stack are non-secured.
Note: MAC security is not supported in the P330-ML switches. For this reason, this
command does not affect the P330-ML modules. The set security mode
command is used to enable setting MAC security for ports in other P330 modules in
the stack.
The syntax for this command is:
set security mode { enable | disable }
Output Example:
P330-N> set security mode enable
Security mode enabled.

set arp-aging-interval

Use this command to set the ARP table aging interval for gateways' entries in the
agent ARP table. The MAC value for the default gateway of ML agent in the ARP
130
The time in seconds.
Avaya P334T-ML User's Guide