Bar Graph Display - KERN FES 33K0.1 IPM Operating Instruction

6.8.2

Bar graph display

weighing dish unloaded
The weighing range of the balance is divided into 40 graphic cuboids. Zero (0) will
appear on the graphic display if there is no weighing value on the balance. 20 graphic
cuboids are displayed if the balance is loaded up to one half of its weighing range.
In configuration menu 1 (chapter 7) you can activate/deactivate the bar graph dis-
play.
Parameter selection:
x B.G.
Bar graph display in the respective operating modes:
Bar graph display
NOTE:
If tare weighing is being carried out, the graphic weight display will continue to indi-
cate the number of cuboids of the tare weight.
FES/FEJ-BA-e-1132
half of weighing range
0 Hide bar graph
* 1 Show bar graph
Operating mode
Weighing mode
Tolerance weighing with 1 or
2 limits
Tolerance weighing with 3 or
4 limits
weighing range is used to full capacity
19