Data Output; Format For Data Transmission - KERN FES 33K0.1 IPM Operating Instruction

15.4 Data output

15.4.1

Format for data transmission

Any of the data formats below may be set by selecting the relevant function on the
balance ( see menu overview chap. 7.2):
• 6-digit data format
Consisting of 14 words, including final character; CR=0DH, LF=0AH (CR=balance
reverse motion / LF=line feed)
1 2 3
P1 D1 D2 D3
• 7-digit data format
1 2 3
P1 D1 D2 D3
NOTE: The 7-digit format is identical to the 6-digit, with the exception of the addi-
tional character D8.
• Extended 7-digit data format
Not documented
For models e (calibration) = 10 d (legibility) the formats shown below are available:
• 6-digit data format
1 2 3 4
P1 D1 D2 D3 D4 D5 D6 D7
Consisting of 15 words, including final character; CR=0DH, LF=0AH (CR=balance
reverse motion / LF=line feed). Slash "/" is inserted after the e-value.
• 7-digit data format
1 2 3 4
P1 D1 D2 D3 D4 D5 D6 D7 D8 D9 U1 U2
Hinweis: The 7-digit format is identical to the 6-digit format with the exception of
the additional character D9.
84
4 5 6 7
D4 D5 D6
4 5 6 7
D4 D5 D6
5 6 7 8
5 6 7 8
8 9 10 11
D7 U1 U2 S1
8 9 10 11
D7 D8 U1 U2
9 10 11 12
D8 U1 U2 S1
9 10 11 12
FES/FEJ-BA-e-1132
12 13 14
S2 CR LF
12 13 14 15
S1 S2 CR LF
13 14 15
S2 CR LF
13 14 15 16
S1 S2 CR LF