KERN FES 33K0.1 IPM Operating Instruction page 59

4. Entering limiting values:
Press for about 4 seconds, until
[L. SET] is displayed, then
release
5. Place sample for the lower (i.e.
smaller) limiting value on the weigh-
ing plate:
6. Save:
FES/FEJ-BA-e-1132
L. SET
The flashing display (last saved value)
prompts you to enter the lower limiting
value (L.SET)
An acoustic signal sounds, the saved
lower limit is briefly displayed.*
H. SET
K
The flashing display (last saved value)
prompts you to enter the upper limiting
value ( )
H. SET K
59