KERN FES 33K0.1 IPM Operating Instruction page 62

4. Entering limiting values:
Press for about 4 seconds, until
[L1 SET] is displayed, then
release
5. Place sample for the first limiting
value on the weighing plate:
6. Save:
7. Place sample for the second limiting
value on the weighing plate:
62
L1. SET
a
The flashing display (last saved value)
prompts you to enter the first lower limit-
ing value (LK.SET)
An acoustic signal sounds, the saved
first limiting value is briefly displayed.*
L2. SET
The flashing display (last saved value)
prompts you to enter the second limiting
value (L2.SET)
FES/FEJ-BA-e-1132
z0
g
1z0
g