Entering 3 Or 4 Limits By Weighing; Numeric Entering Of 2 Limits - KERN FES 33K0.1 IPM Operating Instruction

12.5.2

Entering 3 or 4 limits by weighing

To enter 3 or 4 limiting values [L1 SET] - [L3 SET] or [L4 SET], repeat steps 7 and
8 (see also chapter 12.4.2).
12.5.3

Numeric entering of 2 limits

Operation
1. Activate tolerance weighing function
[2.SEL.2] or [2.SEL.3] (see chap. 7).
2. Actuate required parameter selection
or
until
[23. P .2] or [24.
1
more settings of your choice (see chap.
12.3) are carried out in the same way
3. Leave function menu
70
Parameter selection for 2 limiting points:
TXP.2] appears;
Parameter selection for difference value:
The balance is now in tolerance weigh-
ing mode; the tolerance marker ( ) ap-
pears
Display
r SEL 2
2q CQ. 1
2s P . 2
1
2t TXP. 2
a
z0
FES/FEJ-BA-e-1132
g