For 3 Or 4 Limits; Basic Settings For Weighings With Tolerance Range - KERN FES 33K0.1 IPM Operating Instruction

12.2.2

For 3 or 4 limits

If 3 or 4 limiting points are to be set, this is displayed in the bar graph. The length of
the represented bars indicates where within the tolerance range the weighed of the
goods to be weighed are.
4 Seg-
4点設定
ments
3 Seg-
3点設定
ments

12.3 Basic settings for weighings with tolerance range

Operation
1. Activate tolerance weighing function
[2.SEL.2] or [2.SEL.3] (see chap. 7).
2. Selection of tolerance parameters
or
Any time you press the F-key you can
select between the following settings,
see tab. 1.
3. Changing the parameter value
or
56
A bar graph shows the different limits.
Limit 5
Limit 4
Limit 3
Limit 2
Limit 1
The first parameter for setting the toler-
ance marker appears.
Display
r SEL 2
2q CQ. 1
2q CQ. 1
2q CQ. 2
FES/FEJ-BA-e-1132