10 Weighing mode
The manufacturer's standard configuration is "Weighing":
Under this menu item, you can combine the function "Weighing" with the function
"Parts counting" or "Percent determination" (settings see chapter 7.2).
This way, 3 different weighing modes are available for you:
Apart from selecting a weighing mode, you can activate other functions (Tolerance
weighing, adding); see chapter 7. This enables you to display your measuring values
according to your requirements.
Actuating the
key will switch the displayed value to the active function (e.g. "g" to
"Pcs").
10.1 Weighing
Operation
Switch on balance:
Your balance is ready to weigh as soon
as the "0.0" display appears.
Put on items to be weighed, weighed
value is displayed.
By repeated pressing, switching option of
the displayed value into other activated
functions/weighing units
FES/FEJ-BA-e-1132
Function [q SET.1], see chapter 7.2.
1. Weighing [q SET.1]
2. Weighing/parts counting [q SET. 2]
3. Weighing/percent determination [q SET. 3]
Display
The balance will carry out a self-test
:
a
a
75s0
z0
g
g
41