KERN FES 33K0.1 IPM Operating Instruction page 60

7. Place sample for the upper (i.e. lar-
ger) limiting value on the weighing
plate:
8. Save:
The balance returns to tolerance weigh-
ing mode.
From here evaluation takes place
whether the goods to be weighed are
within the two tolerance limits.
* If you want to set for your tolerance weighing only one limit point
(parameter selection [23.
60
An acoustic signal sounds, the saved
upper limit is briefly displayed.
)
, ignore step 7 and 8.
P .1]
1
FES/FEJ-BA-e-1132