Installation Of The Software Expresso 3 - Techkon Spectro Jet Manual

2.2 Installation of the software ExPresso 3

Manual TECHKON SpectroJet Chapter 2 – Installation
System requirements:
• PC with MS-Windows XP, Vista or 7
• 2 USB ports
• Screen resolution: 1024 x 768 or
higher
The software is optimized to be operated
with a touch sensitive screen
(for example: Elotouch 1715L 17").
However, working without a touchscreen
by using a conventional mouse / trackpad
and keyboard is also possible.
Recommended color bar:
Print control strip TECHKON TCS Digital
(included with ExPresso 3 software).
Installation:
It is important to carry out the following
steps in the right order, to make sure that
the USB device drivers will be installed
properly.
1. Make sure that SpectroJet and the USB-
dongle (software protection key) are NOT
connected to the PC. Insert the TECHKON
CD into the CD drive of the computer. (You
will find the CD at the back of the manual).
2. Select "ExPresso Installation" from the
menu. The installation routine will start auto-
matically. Follow the steps of the installation,
until it is completed.
3. Now, after the installation was finished
successfully you can connect SpectroJet with
the USB cable and the USB-dongle to the PC.
4. TECHKON ExPresso can now be launched.
Page 11