Techkon Spectro Jet Manual page 70

PhotoLab settings
When you open the pop-up window "PhotoLab settings" in the menu bar of the
program module PhotoLab, you can select and edit three areas.
Page 70
1. General settings:
This is the window for setting the dimensions
of the L*a*b*-color circle and the ∆L*a*b*-
color deviation.
2. Tolerances:
In this window the tolerances for the color
deviations are defined and the size of the
tolerance circle is set.
3. Mean values:
It can be appropriate to take several single
measurements on one sample which then are
averaged to an average value. The number of
measurements which result in the calcula-
tion of the average value is defined in this
window..
Manual TECHKON SpectroJet Chapter 4 – SpectroConnect