Techkon Spectro Jet Manual page 37

Measuring conditions – GrayGuide targets
If in "Settings  System / Software" the option Gracol G7™ was selected to be the
preferred Gray mode display (see picture p. 51),"Settings  Measuring conditions
 GrayGuide targets" opens now a menu window, which allows to adjust the target
values manually.
Gray patches as well as the automatic paper white can be edited. If required all values
can be reset to the G7™ defaults.
Tip: There is no access to the settings windows described on page 33 – 35, when in
"Settings Measuring conditions  Measurement devices" SpectroDrive Simulator
is selected. The simulator is a virtual measurement device which can be used for tests
and demonstrations when no real hardware device is connected. The "SpectroDrive
Simulator" will also be used when no software protection key (dongle) is connected
and the software runs in demo mode.
Manual TECHKON SpectroJet Chapter 3 – How to use SpectroJet Page 37