Techkon Spectro Jet Manual page 32

• Now click on the "New" button, which you find on the lower left side of the menu window.
The window "Target values / tolerances for ink" appears.
• Choose from the pull-down-menu the "Ink name" (1.) of a color, which you have already
defined in "Settings"  Printing conditions  Inks" (see p. 27).
• Additionally you can change the target values and tolerances of this color manually by editing
the text boxes or take the measurement data of SpectroJet by pressing the "Measure" button
(2.).
1.
2.
• Confirm the color and eventually set changes with "OK". Now the color appears in the left
section of the menu window and is added to the new target set.
• Thus proceed with all the colors which you want to add to a target set.
• Already existing target sets can be duplicated, renamed, imported and exported by using the
buttons in the lower right section of the "Target values /Tolerances" window (see picture on
p. 31).The target sets of the five paper classes can not be deleted.
Page 32 Manual TECHKON SpectroJet Chapter 3 – How to use SpectroJet