Techkon Spectro Jet Manual page 59

Using the button "Mask ink zones" in the lower part of the menu window (see p.
57) you will switch to the "Mask ink zones" function. Here you can define which
OK-sheet will be the starting point for the evaluation of the print job. Optionally a
measurement can be selected to serve as starting point.This function is available for
the top side as well as for the reverse side.
Analyze – Single measurement report
"Single measurement report" can be compared with "ISO-report single measure-
ment", but the evaluation does not refer to the ISO standard.Therefore the informa-
tion sections "Solid density" and "Dot gain" refer only to individually defined target
sets and tolerances.
Up to eight colors can be displayed, e. g. CMYK and four spot colors.
Manual TECHKON SpectroJet Chapter 3 – How to use SpectroJet Page 59