Techkon Spectro Jet Manual page 76

Standards: The measurement device is manufactured according to the
recommendations of the technical standards DIN 5033 part1-9,
CIE, DIN ISO 16 536 part 1+2 and ISO 5-3.
The accuracy of the device is checked during the manufacturing
by spectral measurements on color samples which were measu-
red and certified by the German Institute for Material Testing
(Bundesanstalt für Materialprüfung, BAM).
The calculation of colorimetric values is according to the for-
mulas and tables of DIN 6174, DIN 5033 part 1-9 and CIE.
The calculation of densitometric values is according to the for-
mulas and tables of DIN 16527 part 3, ISO 5-3 and the hand-
book of standardization of the German Printing and Media
Industries Federation (Bundesverband Druck und Medien e.V.)
and fogra (Forschungsgemeinschaft Druck e.V.).
D-61462 Königstein
Place Date Signature